Wi-Fi Setup Guide

Follow these steps to configure your OcuTrap device to connect to a Wi-Fi network.

Step 1: Access the OcuTrap Device Management Interface

1. Open the OcuTrap Management Interface on your computer or smartphone.

2. Select Your Trap

Step 2: Open the Settings Menu

1. Click on the "Settings" Button in the trap management panel.

Step 3: Configure Wi-Fi Settings

1. Enter the Wi-Fi Network SSID in the "Wi-Fi Name" field.

2. Enter the Wi-Fi Network Password in the "Password" field.

3. Select the Wi-Fi Authentication Type if needed from the "Advanced" dropdown (WPA2, WPA, or WEP). This will default to WPA2 which is the standard for most Wi-Fi networks.

4. Save the Settings by clicking the "Save" button.

Step 4: Verify the Connection

1. Restart your OcuTrap device to apply the new settings.

2. Check the Connection Status in the OcuTrap management interface.

Troubleshooting Tips

• Double-check SSID and password.

• Ensure Wi-Fi network is operational.

• Verify the authentication type matches your network.

When enabled, OcuTrap will try to connect to Wi-Fi. If it has trouble connecting, it will fall back to cellular.

Any trouble Contact Us